Sabbir Mobile

Followers

Saturday, October 29, 2011

Hwk req to fbi file creater Box Auth Error : 20 / 32

DO NOT Perform This Process Unless You have Box Auth Error : 20 / 32

Update Client Reports "Use Update Firmware to Authorize UFS !" or You are Advised to do so.

1. Run Update Client.
2. Select Your Language.
3. Click "Next".
4. Wait Until the "Update UFS Firmware" Button is Enabled and then Click it.
5. Select req.fbi File, you will Need to get this file From the Support Area.
6. After a Few Seconds the Process will Complete and Create a File Called xxxxxx.req. (Where xxxxxx is Your UFS Serial Number)
7. Send this File to your UFS Reseller.
8. When you Receive xxxxxx.fbi from your UFS Reseller, Perform Steps 1-4 above.
9. Select xxxxxx.fbi
10. After a few Seconds your Box will be Authorized.
11. Update Box.

Your UFS Reseller is the Only Person who can Help with this Process, do not Ask here in the Forum, We will not Generate xxxxxx.fbi Files for you.

NOTE :

1. The xxxxxx.fbi File Sent by your UFS Reseller is one Time Use Only.
2. Once you have made the xxxxxx.req File, do not Perform Any Other Steps on the Box, since this will cause the xxxxxx.fbi File to be Out of Sync.

Req FBI :
Req.zip

3 comments:

if any problem or live chating than pm me on yahoo my id is smobile35@yahoo.com

This Blog Is Help Full........?