5130 contact service OK......hot......hot
As we know, RM 495 is Nokia BB5 that categorized in SL 3 Phone (Security Level 3)...
That is because this phone have protected PM 308 that cannot be written in Local/Flash Mode condition...and because some other reason...
First...Let See Some Fact...
1. In normal condition(Local/Flash Mode), we cannot write/modify this area PM 308... I did test using MXKey, try to write this PM 308....result failed...but this area not be corrupt/modified... its mean... in normal condition, even CPU cannot modify this area by its self.... (Some people told me, with some trick we can write this area)
2. In Normal condition (Local/Flash Mode), we can do write/modify RPL or Certificate... All of us know about this... that is why we can do Superdongle Repair...
3. PM Area 120 contain some Data SIMLOCK that have connection with PM area 308... this area(PM 120) have no protection from written...but will be syncronized.... or chek???...or analized by CPU using it certificate... that is just my opinion... i am not a programmer...
So... Lets we make some analysis.....
Refer to the fact number 1... in normal condition this PM 308 will not corrupt/modified forever...if hardware still have good condition...
Then... the important question is... how can it corrupted as reported by many people here in gsmforum???
So... the answer is MAYBE NOT!!! Its not corrupted... but the others... other important PM value have corrupted....
And Offcourse...this condition cause MXKey Software or CPU???, read result like below...
Quote:
Phone Type: RM-495 (Nokia 5130c-2)
SW Version: V 06.65 01-04-09 RM-495 (c) Nokia
Imei plain: 35932902982888-6
Language Pack:
- not available.
SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST failed!
SECURITY_TEST passed
SIMLOCK_DATA corrupted!
and because many people here doesnt have knowledge about this...(or i have wrong knowledge about this)........ if you ask for help in here with LOG like that... you will got answer like below...
“not support right now brother... its SL3... wait for next update...” this make hard situation for product suporter to counter this....if my knowledge is right offcourse...
But... in fact... you can fix that case... if you have backup important value... like full Valid PM and Valid Certifikat(RPL file)...at least Valid NPC(not sure about this) and doing right step...
So... how in practice to solve that???
There are several ways... depend on the case....
Refer in my case....
My first log like this....
Quote:
Phone Type: RM-495 (Nokia 5130c-2)
SW Version: V 06.65 01-04-09 RM-495 (c) Nokia
Imei plain: 35932902982888-6
Product Code: 0578116
Language Pack:
- not available.
This phone have PM308 protected, SD security in not restorable.
This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
After some wrong operation at writing PM 1 and 309...come like below...
Quote:
Phone Type: RM-495 (Nokia 5130c-2)
SW Version: V 06.65 01-04-09 RM-495 (c) Nokia
Imei plain: 35932902982888-6
Language Pack:
- not available.
SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST failed!
SECURITY_TEST passed
SIMLOCK_DATA corrupted!
Lucky... i do backup before... all important value....
But maybe cause i do wrong step.... it come like this below...
Quote:
Phone Type: RM-495 (Nokia 5130c-2)
SW Version: V 06.65 01-04-09 RM-495 (c) Nokia
Imei plain: 35932902982888-6
Product Code: 0578116
Language Pack:
- not available.
This phone have PM308 protected, SD security in not restorable.
This is SL3 phone(Simlock2 format).
- Avoid SW Downgrade & manual erase to this phone !
SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed
Imei net: 359329029828886
Version: SIMLOCK SERVER
Provider: Nokia Test, Country: Finland
Counter: 0/3, 0/10
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
BLOCK 1: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 2: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 3: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 4: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 5: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 6: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
BLOCK 7: 1=OPEN 2=OPEN 3=OPEN 4=OPEN 5=OPEN, DATA=FFFFFF
In fact... the phone live normally....All fitur are OK... amazing....
if you doing chek using JAF Software...all seems ok...security and simlock test will passed... and there is no Lock....all block open...
but in MXKey BUS Chek or Scan.... simlock invalid..... even there are no lock and all block are open...as you can see...
So... Is this some kind of Bug????????
I dont know... i am not a programmer dear........
So... what is the right step???... to make all have valid value....
Its easy... just ask to MXKey coder to fix the bug!!!
LOL...... just kidding brothers....
The key is..... how to get the phone with beginning condition.... like log below...
Quote:
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
I think its possible....cause PM 308 cannot corrupt/modify......
Maybe someone here know how to resolve this....
If you know...please share...step by step....
After...this...maybe we can make SX4 Auth...and write PM 1 and 309 as normally....
